JVC LT-15B60SJ, Instructions Manual

Page: 18 / 29

ENGLISH - 17 -
• If you want to watch a VCR source , then it will
be better to set VCR mode “on”. For this,
while the cursor is on this item press the
“ ” or “ ” button to set it “On”.
• If you want to watch a DVD , then you must set
this item “off”; because DVD is not a source
like a VCR and to see the picture better, you
must set the VCR mode “Off”.
To Store Settings
• Press “ ” button on Store option to store
Programming menu settings.
• You can also store a setting by pressing “ OK ”
button on the selected setting.
• “ STORING ” is displayed on screen during
the store process.
Program Table
By pressing “ ” or “ ” button, select the sec-
ond icon. Program table appears on the
screen.
GRZQWRDGMXVWFKDQQHORUGHU
3URJUDP7DEOH
=')
,79
&
%%&
&
&
&
6
Program table shows the programme num-
bers and the names assigned to the
programmes.
Here you can adjust the channel order by
moving or deleting the channels.
First of all press the “ ” button.
Using the GREEN button you can move a
programme into another programme’s loca-
tion. Press the direction buttons to select a
programme and press the GREEN button.
Then select another programme and press
the GREEN button again. The first selected
programme moves into the location of the sec-
ond selected programme.
Using the YELLOW button you can delete any
programme you want.
A.P.S. (Auto Programming System)
By pressing “ ” button, select the third icon.
A.P.S. menu appears on the screen.
GRZQIRU$36
$36
$36
&RXQWU\ 8.
country
By pressing “ ” or “ ” button, select coun-
try. Press “ ” or “ ” button to select the coun-
try where you are.
A.P.S.
By pressing “ ” or “ ” button, select A.P.S.
When “ ” or “ OK ” button is pressed, the fol-
lowing warning is displayed.
$36:$51,1*
$OO3UHVWRUHG3URJUDPPHV
:LOO%H'HOHWHG
0HQX!WR&DQFHO 2.!WR6WDUW
If you want to cancel A.P.S. function, press the
“ MENU ” button.
If “ OK ” button is pressed, A.P.S. starts and the
following warning is displayed.
$36LVUXQQLQJ
3OHDVH:DLW
0HQX!WRH[LW
If you press the “MENU” button, A.P.S. function
stops and Program table appears on the
screen.
If you wait till A.P.S. is finalized, Program table
is displayed with the programmes found and
located.
01-ENG-1525-17MB18-1861UK_15B60SJ-50069375.p65 30.09.2005, 10:44 17