Mounting the Camera (Continued)
2
Mount the dome cover
①
Clean the dust and dirt on the dome cover.
②
Align the position marks (3 locations) on the camera unit and dome cover,
followed by pressing in directly to mount the cover.
③
Tighten the dome cover fastening screw.
.
.
Position alignment
mark (x 3)
Dome cover
Dome cover protective sheet
Note
v
Ensure that the silica gel (provided) has been inserted before mounting
the dome cover.
v
Be sure to secure the dome cover firmly. If it is not firmly secured, the
cover can drop or the humidity inside the camera can increase and fog
up the interior of the cover.
v
When the cover is removed again after mounting the dome cover, the
field angle may changed. If the field angle is changed, re-adjust the
focus and the field angle.
v
Ensure that the fall prevention wire of the dome cover is not caught
between the dome cover and the base. Failure to do so may prevent
the dustproof and waterproof functions from working properly.
Installation
18
