JVC LST0728-001C, Instructions Manual

Page: 66 / 168

58
Basic Operation
Settings (continued)
Note :
●
When the recording program (recording server) is operating, the [PTZ Preset Positions...] button is disabled. To stop the recording server
temporarily, press the [Service Manager...] button on the [Camera Record Setting] screen, followed by clicking the [Pause] button.
(
A Page 83)
●
Video images and audio sound are not recorded when the recording server is temporarily stopped. Display of live images on the surveillance
computer is also turned off.
●
Even when A Always B is selected under [When to store images in database]
D
in the recording control mode, recording is not executed during
the interval when the [Scheduler...] is set to A offline B . ( A Page 53)
●
Clicking [Cancel] does not cancel the picture quality and settings that are specified on another screen.
Setting Picture Quality
Clicking the [Preview Image] button while you are adjusting the
camera settings enables you to view the effect of your settings.
1
Select [Camera Record Setting] from the main
menu
2
Select a camera from [Device Manager] and click
[Camera Settings]
●
The [Camera Settings] screen appears.
3
Click [Image Quality...]
●
The [Configure Device] screen appears.
Note :
●
It is recommended that you set the picture quality to
approximately 24 KB (VGA). Specifying a higher image quality
may affect the sound and cause the frames to be dropped.
Memo :
●
The [Configure Device] screen may vary with cameras.
●
Refer to the [Instruction Manual] of the respective cameras for
the setting items.
Recording Camera Images
(continued)
Item Preset Values Description
H
Exclude
Regions
Settings
^ Enables you to specify the regions to exclude from motion detection. ( A Page 104)
Exclude Regions...
Region Color... Not used.
I
PTZ Preset
Positions...
^ Enables you to specify preset positions and patrolling.
When a configurable camera is selected, this button is displayed to the right of the
[Outputs...] button.
J
Outputs... ^ Enables you to specify output settings. ( A Page 102)
K
Event
Notifications...
^ Enables you to select events for triggering event notification. ( A Page 102)
L
Image Quality... ^ Enables you to specify the image resolution and picture quality. ( A Page 58)
Example of [Configure Device] Screen