83
How To Use
The remote control can operate most of your video recorder's
functions, as well as basic functions of TV sets and satellite
receivers of JVC and other brands. (
pg. 53, 54)
●
Point the remote control toward the sensor window.
●
The maximum operating distance of the remote control
is about 8 m.
NOTES:
●
When inserting the batteries, be sure to insert in the
correct directions as indicated under the battery cover.
●
If the remote control doesn't work properly, remove its
batteries, wait a short time, replace the batteries and then
try again.
q
– –:– – (DISPLAY) Button
switches display
between clock time, tape remaining time,
counter readings and preset position*.
pg. 19
* Preset position is not displayed during playback.
w
TV/VCR Button
switches connected TV's mode
between TV and AV.
pg. 14, 17, 18
e
REVIEW Button
"reviews" timer-recorded
programme.
pg. 33
r
Button
transmits entered the PlusCode
number to the recorder.
pg. 20
t
WEEKLY Button
enables timer recording of
weekly serials.
pg. 21, 23
y
‰
Button
engages timer-standby mode.
pg. 21, 23
u
AUX Button
selects recorder's auxiliary input
mode.
pg. 44
i
MENU Button
accesses Menu screen.
pg. 11
o
Auto Tracking Button (
)
enables/disables
auto tracking mode during playback
pg. 30
SP/LP/EP Button
selects tape speed.
pg. 17, 18
p
OK Button
enters selections made in on-screen
menus.
pg. 11
Q
30 SEC Button
initiates a 30-second period of
fast-motion playback.
pg. 32
W
PR +/– Button
— same as button on recorder.
pg. 17, 18
E
DATE +/– Button
inputs date of programme for
timer recording.
pg. 22
R
Fast Forward [FF] Button
fast-forwards tape;
initiates high-speed forward search.
pg. 14,
15
T
PAUSE Button
— same as button on recorder.
pg. 15, 17, 18
Y
@
#
Button
initiates functions such as Index
Search
pg. 32, variable-speed search, frame
by frame playback.
pg. 15
TV
+/– Button
controls volume of connected
TV.
pg. 53
Remote Control LCD
The remote control can operate not only the video
recorder but also some of your TV and satellite receiver's
functions. The LCD indicates which of these (VIDEO, TV
or CABLE/SAT) the remote control can currently operate.
When you first purchase the remote control, or after you
have just replaced the batteries, VIDEO A (A code) is
selected.
1
To operate your video recorder, first press
VHS
or
DV
.
To switch remote control's A/B/C/D code, refer to page
52.
2
To operate your TV, first press
TV/CABLE/SAT
until "TV"
appears on the LCD (
pg. 53).
3
To operate your satellite receiver, first press
TV/CABLE/
SAT
until "CABLE SAT" appears on the LCD (
pg. 54).
NOTES:
Even if “TV” is displayed on the LCD, the following
operations can be performed without switching the mode.
●
Basic operations for the recorder
After an operation is completed, “TV” reappears on the
LCD.
●
Express Timer Programming and the VIDEO plus+ Timer
Programming operations
To perform a TV operation again, switch to TV mode
first.
●
Accessing main menu
To perform a TV operation again, switch to TV mode
first.
