HOW TO USE THE MENU
FUNCTIONS
(cont’d)
8
DISPLAY AND SELECTIONS IN THE <SET-UP
MENU> MODE (SETTING)
• H. POSITION (to adjust horizontal screen position) • CONTROL LOCK (to lock operation buttons)
• V. POSITION (to adjust vertical screen position)
• STATUS DISPLAY (to adjust status display)
• WHITE BALANCE (to adjust white balance)
You can set the following set-up menu items.
1. While pressing the MENU button, press the
PHASE (
) button.
The <SET-UP MENU> screen is displayed.
* The screen automatically disappears when no operation is
performed after about 5 minutes.
2. Press the PHASE (
) or CHROMA (
) button
to select the desired menu item.
A selection mark (
3
) is put next to the selected item.
3. Press the VOLUME/SELECT buttons to set.
●
For the WHITE BALANCE setting, select the CUT OFF or
DRIVE setting screen, then select the buttons (PHASE/
CHROMA/BRIGHT) corresponding to the function indicated
(R/G/B).
●
Press the EXIT (MENU) button to return to the <SET-UP
MENU> screen.
Notes:
<SET-UP MENU> screen
<Front panel buttons>
1
Selection mark (
3
): Indicates the
menu item you select.
2
Menu item: Menu items you can
select.
3
Setting display: Indicates the
current settings (value).
4
Function display: The functions of
the front panel buttons (7 buttons
on the left) correspond to the
function displayed.
Function
Contents
displayed
∞
Forward the menu item.
5
Reverse the menu item.
–
Lower the adjustment
value. (to the minimum)
+
Raise the adjustment
value. (to the maximum)
3
Forward the setting value.
2
Reverse the setting value.
EXIT
Exit the <SET-UP MENU>
screen. (release)
DRV
Selects DRV adjustment.
CUTO
Selects CUT OFF
adjustment.
R
Adjusts red signal level.
G
Adjusts green signal level.
B
Adjusts blue signal level.
DISP
Turns the ON-SCREEN
display on or off. (This
function is effective only
in the DRIVE or CUT OFF
adjustment mode.)
Front panel
Function
Contents
button
displayed
PHASE (
)
∞
Forward selection mark (
3
)
CHROMA (
)
5
Reverse selection mark (
3
)
Front panel
Function
Contents
button
displayed
+
Increase (to max. value)
3
Forward the setting value
CUTO
Selects CUT OFF setting screen
–
Decrease (to min. value)
2
Reverse the setting value
DRV
Selects DRIVE setting screen
VOLUME/
SELECT (–)
VOLUME/
SELECT (+)
H. POSITION
V. POSITION
WHITE BALANCE
CONTROL LOCK
STATUS DISPLAY
PHASE
MENU
PHASE
CHROMA
VOLUME/SELECT
–
+
EXIT
< SET–UP MENU >
‰
H . POS I T I ON
:
0
V . POS I T I ON
:
0
WH I T E BA L A N C E
CONTROL LOCK
: OFF
STATUS DISPLAY
: ON
PHASE
CHROMA BRIGHT CONTRAST
MENU
VOLUME/SELECT
–
+
LCT0883-001A
01.2.8, 14:03
10
