JVC LCT2104-001B-A User Manual Download Page 65

Page: 65 / 80

Button Functions

The R

ETURN

+/TV button has three functions:

Return

- Returns to the channel viewed just before the channel currently onscreen.

- Lets you program a specific channel to return to while scanning through the

channels using the CH+ and CH– buttons.

- Returns to the TV mode.

Press the R

ETURN

+/TV and hold for three seconds

The channel currently active has been programmed as your channel. Now scan

through the channels using the C

HANNEL

+/– buttons.

Press the R

ETURN

+/TV

You will return to your programmed channel.

• To cancel your channel, press and hold the R

ETURN

+ button for three seconds. The

message “RETURN CHANNEL CANCELLED!” will appear.

• works only with the /– buttons. Pressing any number key will cancel

/TV

RETURN CHANNEL

PROGRAMMED!

By pressing the S

OUND

button, you can change the A.H.S.+ (Advanced Hyper Surround plus)

mode, A.T.C. (Advanced Tone Correction), SMART SOUND, MaxxBass or HYPER BASS on or
off.

A.H.S.+ -

Adds a more spacious surround sound. Music gives basic effect and movie for more
effect.

A.T.C. -

Reproduces distinctive sounds with tone correction.

SMART SOUND -

Decreases high sound levels, giving a regulated sound level.

MaxxBass -

Emphasizes the bass sound

(LT-40X887, LT-40X787, LT-40X667, LT-37X887,

LT-37X787 and LT-37XM57)

HYPER BASS -

Increases bass levels, giving a richer, deeper bass.

(LT-32X887, LT-32X787 and LT-32X667)

Press the S

OUND

button

†

To select A.H.S.+, A.T.C., SMART SOUND,
MaxxBass or HYPER BASS

√

To choose the setting

Press the M

ENU

when finished

Sound

SOUND EFFECT

SELECT

OPERATE

EXIT

A.H.S.+

A.T.C.

SMART SOUND

MaxxBass

MOVIE MUSIC OFF

ON OFF

HIGH LOW OFF

MaxxBass is a registered trademark of Waves Audio
Ltd. in the USA, Japan and other countries.

Notes:

• Smart Sound may become an unnatural effect, depending on the signal source.
• You can adjust BALANCE only when A.H.S.+ is off.
• When headphones are being used, MaxxBass or HYPER BASS can not be selected.

SOUND EFFECT

SELECT

OPERATE

EXIT

A.H.S.+

A.T.C.

SMART SOUND

HYPER BASS

MOVIE MUSIC OFF

ON OFF

LCT2104-001B-A English.indd 65

4/20/06 9:25:57 AM

Summary of Contents for LCT2104-001B-A

















































































Search results

Summary of Contents for LCT2104-001B-A

Reviews:

Related manuals for LCT2104-001B-A

Brands by name

Popular brands

JVC LCT2104-001B-A, User Manual

Search results

Summary of Contents for LCT2104-001B-A

Reviews:

Related manuals for LCT2104-001B-A

Brands by name

Popular brands