JVC KY-PZ100BE Instructions Manual Download Page 97

Page: 97 / 116

Performing Live

Streaming

By combining with the decoder or PC application

that supports live streaming, you can perform audio

and video streaming via the network.

Supported Formats

Video

H.264

1920x1080 (59.94p/50p) 20/16/12/8Mbps (Max)

1920x1080 (59.94i/50i) 20/16/12/8/5/3Mbps

(Max)

1920x1080 (29.97p/25p) 20/16/12/8/5/3Mbps

(Max)

1280x720 (59.94p/50p) 20/16/12/8/5/3Mbps

(Max)

1280x720 (29.97p/25p) 8/5/3/1.5Mbps (Max)

640x360 (29.97p/25p) 3/1.5/0.8/0.3Mbps (Max)
Memo :

Depending on the type of network adapter used

and the connection, the images and audio

sound during live streaming can be choppy.

Audio

AAC

Supported Protocols

MPEG2-TS/UDP

MPEG2-TS/RTP

RTSP/RTP

ZIXI

RTMP

Setting Distribution

Select the terminal for live streaming.

Specify the settings in [Main Menu]

[Network]

[Interface].

(

P61 [ Interface ] )

Set the Resolution and Frame & Bit Rate for

the video to be distributed.

Specify the settings in [Main Menu]

[Network]

[Live Streaming Set].

(

P61 [ Live Streaming Set ] )

For more information on the live streaming

settings, please refer to [[Live Streaming Set]

Combinations that Support Distribution]

(

P 98).

Specify the distribution protocol and

related items.

Specify the distribution protocol and related

items in [Main Menu]

[Network]

[Live

Streaming Set]

[Streaming Server].

(

P61 [ Streaming Server ] )

Select the server for live streaming.

Select the distribution server in [Main Menu]

[Network]

[Live Streaming Set]

[Server].

(

P61 [ Server ] )

Performing Live Streaming

Con
nectin

g to the Network

Summary of Contents for KY-PZ100BE





















































































































Search results

Summary of Contents for KY-PZ100BE

Reviews:

Related manuals for KY-PZ100BE

Brands by name

Popular brands

JVC KY-PZ100BE, Instructions Manual

Search results

Summary of Contents for KY-PZ100BE

Reviews:

Related manuals for KY-PZ100BE

Brands by name

Popular brands