9
Resolution
For setting the resolution on the Live View screen.
[Setting values:
R
640x360, 320x180]
Live Streaming Set
For specifying settings for distributing live video
images.
9
Live Streaming
Starts live distribution when “On” is selected.
[Setting Values: On,
R
Off]
Memo :
0
“On” cannot be selected if streaming is not
possible with the selected resolution, frame rate
and bitrate combination.
0
“On” cannot be selected if network connection
is not established.
0
“On” cannot be selected when FTP is running.
0
Switches automatically to “Off” in the VIDEO
OFF mode.
9
Interface
For selecting the terminal for live streaming.
[Setting Values:
R
LAN, USB]
9
Server
For selecting the server for live streaming.
[Setting Values:
R
Server1, Server2, Server3,
Server4]
Memo :
0
The setting cannot be changed during live
streaming (Live Streaming set to “On”).
9
Streaming Server
For setting the server for live streaming.
Memo :
0
The setting cannot be changed during live
streaming (Live Streaming set to “On”).
9
Server1/Server2/Server3/Server4
* The name that is set in [Alias] is displayed
individually.
o
Alias
For setting a name to distinguish the settings of
this camera.
The name set in this item will be displayed in the
Streaming Server options.
* The default value is “Server1/Server2/Server3/
Server4”.
* You can enter up to 31 characters and ASCII
characters.
o
Type
For setting the system to transfer videos for
distribution.
[Setting Values:
R
MPEG2-TS/UDP, MPEG2-
TS/RTP, RTSP/RTP, ZIXI, RTMP]
Memo :
0
Use reception devices that are compatible with
the respective transfer systems.
0
To use the “ZIXI” setting, a dedicated server is
needed separately.
0
The following items that can be set vary
depending on the setting of this item.
o
Destination Address
For setting details such as the host name and
the IP address of the live distribution destination.
* Enter not more than 127 characters using
single-byte alphanumeric characters (a to z, 0 to
9), single-byte hyphen [-], or dot [.].
o
Destination URL
For entering the URL of the live distribution
destination beginning with “rtmp://”.
There is no default value (blank).
* You can enter up to 191 characters and ASCII
characters.
o
Destination Port
Enter the network port number of the live
distribution destination using an integer
between 1 and 65535.
When [Type] is set to “MPEG2-TS/UDP” or
“MPEG2-TS/RTP”, the default value is “6504”. If
“ZIXI” is set, the default value is “2088”.
Memo :
0
When [Type] is set to “MPEG2-TS/RTP”, only
even numbers from 2 to 65530 can be specified
for the port number.
0
When [Type] is set to “MPEG2-TS/RTP” and
[SMPTE 2022-1 FEC] is set to “On”, N+2 and N
+4 port numbers are also used in addition to the
specified port number (N).
o
Stream ID
For setting the registered stream ID of the live
distribution destination.
The default value varies with the product model.
* Enter not more than 63 characters.
o
Stream Key
Enter the stream key specified at the live
transmission destination.
There is no default value (blank).
* Enter not more than 63 characters.
Network Menu
61
Menu
Display and
D
etailed
S
etti
ngs
