Printed in Japan
KCN-1768
NEKYF70NK9906
■
The Hachioji Plant of Victor Company of Japan, Ltd., has received ISO14001 Certification
under the global standard for environmental management.
Image device
1/2-inch Interline Transfer CCD x 3
Scanning
Progressive
Total pixels
4.35 million (3 x 1.45 million) pixels
Effective pixels for CCD
1.45 million pixels (H: 1,392 x V: 1,040)
Output pixels
1,360 x 1,024
Optical system
Dichroic prism
Aspect ratio
4:3
Lens mount
1/2-inch C mount
Analog output
R/G/B 0.7 V(p-p) 75 ohms each
Output mode
SXGA: 1,360 x 1,024 pixels 7.5 frames/sec.
VGA: 640 x 480 pixels 60 frames/sec.
(Image refresh rate 7.5 frames/sec.)
VGA: 640 x 480 pixels 60 frames/sec.
(Image refresh rate 30 frames/sec.,
vertical resolution: 240 lines)
Output signal is selectable from above three modes
Digital output
SCSI-2 50P half-pitch SCSI connector
Sync output
Hs/Vs 3 V(p-p) (low active)
Image memory
5 frames (4 frames when selecting SXGA analog
output)
Sensitivity
ISO100 equivalent
Quantization
10 bit in 8 bit out
White balance
Auto and manual (menu)
Gain
ISO100, 200, 400 (menu)
Electric shutter
1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/125, 1/250,
1/500, 1/1000, 1/2000, V.SCAN, EEI (menu)
Paint
Manual (menu)
Flare compensation
(Menu)
Dynamic shading
(Menu)
Operating temperature
0 — 40°C
Input voltage
DC12V
Power consumption
Approx. 15W
Weight
Approx. 850g (1.9 lbs.)
Dimensions (W x H x D)
70 x 80 x 150mm
2-13/16 x 3-3/16 x 5-15/16 inches
DISTRIBUTED BY
Design and specifications subject to change without notice.
KY-F70
CAMERA
DIGITAL
1
(1/16)
142.5 (5-5/8)
150 (5-15/16)
41.5 (1-11/16)
14 (5/8)
C-MOUNT
70 (2-13/16)
80 (3-3/16)
88 (3-1/2)
DIMENSIONS
Unit: mm (inches)
OPTIONS
SYSTEM REQUIREMENTS FOR PC
SOFTWARE
RECOMMENDED PRINTERS
SPECIFICATIONS
PART NAMES
AA-P700
AC Power Adapter
MITSUBISHI COLOR PRINTER
CP800DW
CP700DSU/DSE
Photo: CP800DW
Ventilation hole
q
Lens mount
w
Camera mounting bracket
e
Locking screws for the camera mounting bracket (M2.6 x 6mm, 3 units)
r
MENU button
t
SEND/UP button
y
AW/SEL/DOWN button
u
MODE/SET button
i
REC mode lamp
o
PLAY mode lamp
!0
FREEZE button
!1
MONITOR output terminal (D-sub 15-pin, female)
!2
LENS connection terminal
!3
POWER display lamp
!4
DC IN power input terminal (Mini DIN 8-pin, female)
!5
REMOTE terminal (Metal 10-pin, female)
!6
Dip switches
!7
SCSI terminal (Half-pitch 50-pin)
CPU: Pentium
®
166 MHz or faster
At least 20 MB of RAM
At least 10 MB of available hard-disk space
Serial port (RS-232C)
SCSI-2 board (Adaptec AHA-2940AU recommended)
Color monitor with 16,770,000-color recommended
Floppy disc drive
Windows
®
95, Windows
®
98, Windows
®
NT 4.0
TWAIN graphic software such as Adobe
®
Photoshop
®
installed
*Windows
®
95, Windows
®
98, Windows
®
NT 4.0, Adobe
®
Photoshop
®
and Pentium
®
are registered trademarks.
TWAIN 32 Capture Software (Bundled)
RS-232C Camera Control Software (Free software)