JVC KW-XC770 Instructions Manual Download Page 36

Page: 36 / 38

ENGLISH

Symptoms

• “RESET 8” appears on the

display.

• “RESET 1-RESET 7”

appears on the display.

• CD can neither be played

back nor ejected.

• This unit does not work at

all.

• The CD changer does not

work at all.

Remedies

Connect this unit and the CD
changer correctly and press
the reset button of the CD
changer.

Press the reset button of the
CD changer.

While holding

for the CD

player, press

ATT

for

more than 2 seconds. Be
careful not to drop CD when it
is ejected.

Press the reset button on the
front panel (See page 2.)

Causes

This unit is not connected to
a CD changer correctly.

———————

The CD player may function
incorrectly.

The built-in microcomputer
may function incorrectly due
to noise, etc.

About mistracking:
Mistracking may result from driving on extremely rough roads. This does not damage the
unit and the CD, but will be annoying. We recommend that you stop CD play while driving
on such rough roads.

EN33-37.KW-XC770[J]/1

99.11.24, 3:30 PM

Summary of Contents for KW-XC770







































Search results

Summary of Contents for KW-XC770

Reviews:

Related manuals for KW-XC770

Brands by name

Popular brands

JVC KW-XC770, Instructions Manual

Search results

Summary of Contents for KW-XC770

Reviews:

Related manuals for KW-XC770

Brands by name

Popular brands