Settings
Settings
3
Adjust the crossover frequency of the
selected speaker.
• Adjustable items vary depending on the selected
speaker type/speaker size/crossover settings.
<TW Gain (L)>
/
<TW Gain (R)>
Adjusts the output volume of the tweeter (left/
right).
<TW FREQ>
Adjusts the crossover frequency for the tweeter.
<Gain>
Adjusts the output volume of the selected speaker.
<HPF FREQ>
Adjusts the crossover frequency for the front or rear
speakers (high pass filter).
<LPF FREQ>
Adjusts the crossover frequency for the speaker
(low pass filter).
<Slope>
Adjusts the crossover slope.
<Phase>
Selects the phase for the speaker.
<Time Alignment>
Make fine adjustments to the delay time of the speaker
output to create a more suitable environment for your
car.
Select the listening position (
1
), select
[Distance] or [Gain](
2
) to make an
adjustment , then adjust each speaker
setting (
3
).
Time Alignment
1
Select from
<All>
,
<Front L>
,
<Front R>
or
<Front All>
*.
2
Select an item to adjust.
[Distance]
Adjusts the digital time alignment
value.
[Gain]
Adjusts the output volume of the
selected speaker.
3
To determine the adjustment value, see the
following “Determining the value for <Position
DTA> adjustment”.
To initialize the setting value:
Touch
[Initialize]
.
* <Front All> is selectable only when <X'over Network> is set to
[2way].
Setting the speakers and crossover
frequency
1
Select a car type (
1
), select the location
of the speakers (
2
)*, then display the
<Speaker Select> screen (
3
).
Car Setting
* Speaker location selection is available only when <X’over
Network> is set to [2way].
2
Select the speaker type (
1
), select the size
of the selected speaker (
2
), then display
the <X’over> screen (
3
).
Speaker Select
• If a speaker is not connected, select
<None>
.
• When setting the front speakers, also select the
speaker size for
<Tweeter>
.
42
ENGLISH
00_KWV_2019ST_KR.indb 42
00_KWV_2019ST_KR.indb 42
1/6/2018 8:19:20 AM
1/6/2018 8:19:20 AM
