background image

4

INITIAL SETTINGS

INITIAL SETTINGS

 Initial setup

When you power on the unit for the first time or 

reset the unit, the initial setting screen appears.

•  You can also change the settings on the 

<Settings>

 screen. (Page

 

55)

1

  Perform the initial settings.

*

<Demonstration>

(Page

 

56)

Activate or deactivate the 

display demonstration.

<Language>

(Page

 

57)

Select the text language 

used for on-screen 

information.

•  Set 

<GUI Language>

 

to display the operation 

buttons and menu items 

in the selected language 

(

[Local]

) or English 

(

[English]

).

<Angle>

*

(Page

 

7)

Adjust the panel angle.

<iPod Setup>

(Page

 

21)

Select the connection 

method of iPod/iPhone.

<Rear Camera>

(Page

 

35)

Configure the settings to 

display the picture from 

the connected rear view 

camera.

<User 

Customize>

(Page

 

51)

Change the display design.

2

  Finish the procedure.

 The Home screen is displayed.

*

  Only for KW-V420BT .

 Clock settings

1

  Display the Home screen.

On the monitor panel:

KW-V420BT 

KW-V320BT 

KW-V220BT

KW-V120BT  

 2

  Display the 

<Clock>

 setting screen.

•  You can also display the 

<Clock>

 setting 

screen by touching the clock area on the 

Home screen.

2016̲KW-V̲Entry̲K.indb   4

2016̲KW-V̲Entry̲K.indb   4

2015/09/25   10:48

2015/09/25   10:48

Summary of Contents for KW-V220BT













































































Reviews: