Menu item
Selectable setting (Initial: [XX])
USB
*9
Drive Change
: Selects to change the drive when a device with multiple
drives is connected to the USB input terminal (front/rear).
iPod Switch
*10
(iPod/iPhone control)
[Headunit Mode]
/
iPod Mode
/
Application Mode
:
For settings,
'
page 11.
Audiobooks
*10
Normal
/
Faster
/
Slower
: Selects the playback speed of the Audiobooks
sound file in your iPod/iPhone.
Initial selection depends on your iPod/iPhone setting.
Bluetooth
*11
Phone
*12
Connect
/
Disconnect
: Connects or disconnects the Bluetooth phone/
audio device. (
'
page 14)
Audio
Application
Connect
/
Disconnect
: Connects or disconnects the application in the
smart phone. (
'
page 15)
Delete Pairing
For settings,
'
page 15.
Phonebook
Trans
Copies up to 400 numbers from the phonebook memory of a connected
phone to the unit via OPP.
Set PIN Code
Changes the PIN code (1 to 6-digits). (Default PIN code: 0000)
Turn the control dial to select a number, press
/
to move to the entry
position. After entering the PIN code, press the control dial to confirm.
Auto Connect
[On]
: Establishes connection automatically with the Bluetooth device when
the unit is turned on.
Off
: Cancels.
Initialize
[No]
: Cancels.
Yes
: Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.).
Information
Connected Phone
/
Connected Audio
/
Connected Application
*13:
Displays connected phone/audio/application device name.
My BT Name
: Displays the unit name (JVC Unit).
My Address
: Shows address of USB Bluetooth Adapter.
Source Select
AM Source
*14
[Show]
/
Hide
: Enables or disables
“
AM
”
in source selection.
AUX Source
*14
[Show]
/
Hide
: Enables or disables
“
AUX In
”
in source selection.
Bluetooth
Audio
*15
[Show]
/
Hide
: Enables or disables
“
BT Audio
”
in source selection.
Software Version
Displays the firmware version of the unit.
*9
Displayed only when the source is “USB-F/USB-R”.
*10 Displayed only when the source is “iPod-F/iPod-R”.
*11 If the USB Bluetooth Adapter is not connected to the unit, “Please Connect BT Adapter”
appears on the display.
*12 <Connect> will not be displayed if two Bluetooth phones are connected at the same time.
*13 Displayed only when a Bluetooth phone/audio player/application is connected.
*14 Displayed only when the unit is in any source other than the corresponding source “AM
Source/AUX Source”.
*15 Displayed only when the USB Bluetooth Adapter (KS-UBT1) is attached and current source is
not “BT-F/BT-R”.
Menu operations
24
|
ޓ
ENGLISH
2012/1/2
ޓ
21:44:54
KW-SD70BT_E_EN
