ENGLISH
21
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
[PRO EQ]
Adjusts your own sound settings for each source.
• The settings are stored to
[USER]
in
[PRESET EQ]
.
• The settings made may affect the current settings of
[EASY EQ]
.
[62.5HZ]
[LEVEL –09]
to
[LEVEL +09]
(
[LEVEL +05]
): Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you want to adjust.)
[ON]
: Turns on the extended bass. ;
[OFF]
: Cancels.
[100HZ]
/
[160HZ]
/
[250HZ]
/
[400HZ]
/
[630HZ]
/
[1KHZ]
/
[1.6KHZ]
/
[2.5KHZ]
/
[4KHZ]
/
[6.3KHZ]
/
[10KHZ]
/
[16KHZ]
[LEVEL –09]
to
[LEVEL +09]
: Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you want to adjust.)
(Default:
[LEVEL +01]
/
[LEVEL 00]
/
[LEVEL –01]
/
[LEVEL –02]
/
[LEVEL –03]
/
[LEVEL –06]
/
[LEVEL –03]
/
[LEVEL –02]
/
[LEVEL –04]
/
[LEVEL +04]
/
[LEVEL +03]
/
[LEVEL +07]
)
[Q FACTOR]
[1.35]
/
[1.50]
/
[2.00]
: Adjust the quality factor.
[AUDIO CONTROL]
[BASS BOOST]
[LEVEL +01]
to
[LEVEL +05]
: Selects your preferred bass boost level. ;
[OFF]
: Cancels.
[LOUDNESS]
[LEVEL 01]
/
[LEVEL 02]
: Boosts low or high frequencies to produce a well-
balanced sound at low volume. ;
[OFF]
: Cancels.
[SUB.W
LEVEL]
*1
[SPK-OUT]
*2
(Not applicable when 3-way crossover is selected.)
[SUB.W 00]
to
[SUB.W +06]
(
[SUB.W +03]
): Adjusts
the output level of the subwoofer connected via speaker
lead. (Page 34)
[PRE-OUT]
[SUB.W –50]
to
[SUB.W +10]
(
[SUB.W 00]
): Adjusts
the output level of the subwoofer connected to the
lineout terminals (SW) through an external amplifier.
(Page 35)
Audio Settings
[SUBWOOFER
SET]
[ON]
: Turns on the subwoofer output. ;
[OFF]
: Cancels.
[FADER]
(Not applicable when 3-way crossover is selected.)
[POSITION R15]
to
[POSITION F15]
(
[POSITION 00]
): Adjusts the front
and rear speaker output balance.
[BALANCE]
*3
[POSITION L15]
to
[POSITION R15]
(
[POSITION 00]
): Adjusts the left and
right speaker output balance.
[VOLUME
ADJUST]
[LEVEL –15]
to
[LEVEL +06]
(
[LEVEL 00]
): Presets the initial volume level
of each source by comparing to the FM volume levels. (Before adjustment,
select the source you want to adjust.)
[AMP GAIN]
[LOW POWER]
: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
the speakers.) ;
[HIGH POWER]
: The maximum volume level is 35.
[SPK/PRE OUT]
(Not applicable when 3-way crossover is selected.)
Depending on the speaker connection method, select the appropriate
setting for the desired output. (See “Speaker output settings” on
page 22.)
[SPEAKER SIZE]
Depending on the crossover type you have selected (see
[X ' OVER TYPE]
)
on page 22), 2-way crossover or 3-way crossover setting items will be
shown. (See “Crossover settings” on page 23.)
By default, 2-way crossover type is selected.
[X ' OVER]
[DTA SETTINGS]
For settings, see “Digital Time Alignment settings” on page 25.
[CAR SETTINGS]
*1 Displayed only when
[SUBWOOFER SET]
is set to
[ON]
.
*2 For 2-way crossover: Displayed only when
[SPK/PRE OUT]
is set to
[SUB.W/SUB.W]
.
(Page 22)
*3 This adjustment will not affect the subwoofer output.
KW_R950BT_M_B5A-3843-00_EN_3rd Draft.indd 21
KW_R950BT_M_B5A-3843-00_EN_3rd Draft.indd 21
5/7/2021 10:13:29 PM
5/7/2021 10:13:29 PM
