Menu item
Selectable setting (Initial: [XX])
AUDIO
FADER
*5*6
R06 — F06
[00]
: Adjusts the front and rear speaker output balance.
BALANCE
*6
L06 — R06
[00]
: Adjusts the left and right speaker output balance.
LOUD
(Loudness)
ON
: Boosts low and high frequencies to produce a well-balanced sound at
a low volume level.
[OFF]
: Cancels.
VOL ADJUST
(Volume adjust)
-05 — +05
[00]
: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. (
“
VOL ADJ FIX
”
appears if
“
FM
”
is selected.)
L/O MODE
(Line output
mode)
Select if the LINE OUT (REAR) terminals on the rear panel are connected to
the speakers or subwoofer through an external amplifier.
SUB.W
: Subwoofer
[REAR]
: Speakers
SUB. W
*7
(Subwoofer)
OFF
: Cancels.
[ON]
: Turns on the subwoofer output.
SUB.W LPF
*8
(Subwoofer low-
pass filter)
LOW 55Hz
/
MID 85Hz
/
[HIGH 120Hz]
: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W LEVEL
*8
(Subwoofer level)
00 — 08
[08]
: Adjusts the subwoofer output level.
HPF
*8
(High-pass filter)
ON
: Activates the High Pass Filter. Low frequency signals are cut off from
the front/rear speakers.
[OFF]
: Deactivates. (All signals are sent to the front/rear speakers.)
BEEP
(Keytouch tone)
[ON]
/
OFF
: Activates or deactivates the keypress tone.
AMP GAIN
(Amplifier gain)
LOW POWER
: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[HIGH POWER]
: The maximum volume level is 50.
TUNER
SSM
For settings,
'
page 6. (Displayed only when the source is
“
FM
”
.)
AREA
(Frequency
tuning interval)
[AREA US]
: For North/Central/South America, AM/FM intervals: 10
kHz/200
kHz.
AREA EU
: For any other areas, AM/FM intervals: 9
kHz/50
kHz.
AREA SA
: For some South American countries, AM/FM intervals: 10
kHz/50
kHz.
MONO
(Monaural mode)
Displayed only when the source is
“
FM
”
.
[OFF]
: Enables stereo FM reception.
ON
: Improves the FM reception but stereo effect will be lost.
SID
The 12-digit SIRIUS identification number appears on the display. (Displayed
only when SIRIUS Satellite Radio is connected.)
BLEND HOLD
For settings,
'
page 8. (Displayed only when the source is
“
FM
”
or
“
AM
”
.)
IF BAND
(Intermediate
frequency band)
[AUTO]
: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
WIDE
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
RADIO TIMER
For settings,
'
page 7.
*5
If you are using a two-speaker system, set the fader level to “00”.
*6
This adjustment will not affect the subwoofer output.
*7
Displayed only when <L/O MODE> is set to <SUB.W>.
*8
Displayed only when <SUB.W> is set to <ON>.
Menu operations
24
|
ޓ
ENGLISH
2011/12/16
ޓ
18:51:39
KW-R800BT_J_EN