ENGLISH
17
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
STEERING
WHEEL
REMOTE
Purple/black
Car fuse block
Ignition switch
Light blue/yellow
Blue/white: To amplifier
Blue: To power antenna
Make this connection if your vehicle
factory wiring harness does not have
“12 V ignition switch” wire.
Separate red wire
Wiring connection
Signal cord (not supplied)
Remote wire
(not supplied)
To the steering wheel
remote control adapter
Fuse (10 A)
Antenna terminal
Factory wiring
harness (vehicle)
Vehicle dashboard
Black: Ground
Yellow: Battery 12 V
White: Front speaker (left)
White/black
Gray: Front speaker (right)
Gray/black
Green: Rear speaker (left)
*
2
Green/black
*
2
Purple: Rear speaker (right)
Join the same color wires together.
Red: Ignition 12 V
Orange/white: Illumination
Brown: Tel muting
Blue/white: Remote (200 mA max.)
Recommended connection
IMPORTANT
We recommend installing the unit with a
commercially available custom wiring harness
specific for your car and leave this job to professionals
for your safety. Consult your car audio dealer.
JVC Amplifier
*
1
*
1
Firmly connect the ground
wire of the amplifier to
the car’s chassis to avoid
damaging the unit.
*
2
You can also connect a
subwoofer speaker directly
using this lead without an
external subwoofer amplifier.
For setting,
10
.
Custom wiring harness
(separately purchased)
Front output
Rear/subwoofer output
JS_JVC_KW_R520M_M2_1.indd 17
JS_JVC_KW_R520M_M2_1.indd 17
22/10/2015 4:23:44 PM
22/10/2015 4:23:44 PM
