JVC KW-M730BT, Instruction Manual

Page: 66 / 96

Setting Up
66
Ñ
Touch panel adjustment
1
Touch
[
Touch Panel Adjust
]
on the User
Interface screen.
h h
Touch Panel Adjust screen appears.
2
Follow the instruction on the screen and
long touch the center of each
[ ]
.
1
2
NOTE
• To cancel the touch panel adjustment, touch
[
Cancel
]
.
• To reset to the initial status, touch
[
Reset
]
.
Special Setup
You can setup Special parameters.
1
Press the
[
FNC
]
button.
h h Popup menu appears.
2
Touch
[ ]
.
h h
HOME screen appears.
3
Touch
[ ]
.
h h SETUP screen appears.
4
Touch
[
Special
]
.
h h
Special screen appears.
5
Set each item as follows.
■
DEMO
Set the demonstration mode. Default is “ON”.
■
SETUP Memory
Locks or unlocks the Audio SETUP Memory/
Recall/Clear.
■
Audio SETUP Memory
Memorizes the current audio setting.
• Fader/ Balance, Speaker / X’over, Equalizer
(User Preset, SW Level), Position/DTA,
Sound Effect
(P.69)
■
Audio SETUP Recall
Recalls the memorized audio setting.
■
Audio SETUP Clear
Clears the AUDIO SETUP Memory and the
currently memorized audio setting.
■
Software Information
Check the software version of this unit.
(P.66)
■
Open Source Licenses
Displays the open source licenses.
■
Initialize
Touch
[
Initialize
]
and then touch
[
Yes
]
to set
all the settings to the initial default settings.
• Audio SETUP Memory is not initialized.
Ñ
Software Information
Check the software version of this unit.
1
Touch
[
Software Information
]
in the
Special screen.
2
Confirm the software version.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.
!B5A-1733-00_17KWV-K_En.indb 66 2016/12/28 11:25