1-12 (No.MA341)
3.1.3 Removing the REAR BRACKET (See Fig.6, 7)
(1) Remove the three screws
G
attaching the REAR HEAT
SINK. (See Fig.6)
(2) Remove the thirteen screws
H
attaching the REAR
(3) Disconnect the connector wire from FAN connected to con-
nector
CN906
of the SUB BOARD assembly. (See Fig.7)
(4) Disconnect the connector wire from USB CABLE connect-
ed to connector
CN911
of the SUB BOARD assembly.
(See Fig.7)
Fig.6
Fig.7
H
H G
H
CN906
CN911
