
56
Symptom
Remedy/Cause
Bluetooth (Only for KW-AVX836/KW-AVX835)
• Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to place where you can get a better
signal reception.
• The sound is interrupted or skipped while
using a Bluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth
phone.
• Turn off, then turn on the unit.
• (When the sound is not yet restored) connect the
player again.
• The connected audio player cannot be
controlled.
Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
• “
Bluetooth
” is not shown in <
AV Menu
>.
Check whether the Bluetooth adapter (KS-UBT1) is
inserted correctly.
• Bluetooth device does not detect the unit.
• Check whether the Bluetooth adapter (KS-UBT1) is
inserted correctly.
• Search from the Bluetooth device again.
• Reset the unit. When “Open...” appears on the
monitor, search from the Bluetooth device again.
• The unit does not make pairing with the
Bluetooth device.
Enter the same PIN code for both the unit and target
device. If the PIN code of the device is not indicated on
its instructions, try “0000” or “1234.”
• Echo or noise occurs.
Adjust the microphone unit position.
• The unit does not response when you tried to
copy the phone book to the unit.
You may have tried to copy the same entries (as
stored) to the unit.
• “No BT Dongle” appears on the screen.
Bluetooth adapter (KS-UBT1) is removed. Insert the
Bluetooth adapter again or select another playback
source.
• “No Audio Device” appears on the monitor.
Connect this unit and the Bluetooth audio player
correctly.
• “No Voice Device” appears on the monitor.
The connected mobile phone does not have the voice
recognition system.
EN_KW-AVX836[U]3.indb 56
EN_KW-AVX836[U]3.indb 56
10.1.16 5:19:20 PM
10.1.16 5:19:20 PM