12
ENGLISH
SPECIFICATIONS
GENERAL
Power requirements:
Operation voltage:
DC 14.4 V (11 V – 16 V allowable)
Grounding system: Negative ground
Dimensions (W x H x D):
Amplifier unit: 200 x 162 x 30 mm
(7-7/8" x 6-7/16" x 1-3/16")
Display unit: 104 x 40 x 20 mm
(4-1/8" x 1-5/8" x 13/16")
Mass:
Amplifier unit: 750
g
(1.7 lbs)
Display unit:
240
g
(0.53 lbs)
Design and specification subject to change without
notice.
AMPLIFIER SECTION
Maximum power output:
Front:
40 watts per channel
Rear:
40 watts per channel
Continuous power output (RMS):
Front:
15 watts per channel into 4
Ω
,
40 to 20,000 Hz at no more
than 0.8% total harmonic
distortion.
Rear:
15 watts per channel into 4
Ω
,
40 to 20,000 Hz at no more
than 0.8% total harmonic
distortion.
Load impedance: 4
Ω
(4 to 8
Ω
allowable)
Frequency response: 40 to 20,000 Hz
Line input sensitivity/Impedance:
0.5 V/20 k
Ω
Speaker input sensitivity/Impedance:
4 V/1.5 k
Ω
Signal-to-signal ratio: 70 dB
If a kit is necessary for your car, consult
your telephone directory for the nearest
car audio speciality shop.
EN.07-12.KV-RA2[J]
99.1.8, 10:38 AM
12
