1-6 (No.49855)
3.1.4
Removing the heat sink
(See Fig.5)
• Prior to performing the following procedure, remove the front
panel assembly.
(1) Remove the two screws
C
and screw
D
attaching the heat
sink on the left side of the main body, and remove the heat
sink.
Fig.5
3.1.5
Removing the rear panel
(See Fig.6)
• Prior to performing the following procedure, remove the front
panel assembly and bottom cover.
(1) Remove the two screws
E
, one screws
F
and three screws
G
attaching the rear panel on the back side of the main
body.
Reference:
During reassembly, before fixing the rear bracket onto the
main body, insert the STEERING cable into the slot.
Fig.6
3.1.6
Removing the main board
(See Fig.7)
• Prior to performing the following procedures, remove the front
panel assembly, bottom cover, front chassis assembly, heat
sink and rear panel.
(1) Remove the two screws
H
attaching the main board on the
top chassis.
(2) Disconnect the connector CP401 on the main board from
the cassette mechanism assembly.
Fig.7
C
D
Heat sink
G
E
E
F
Rear bracket
Insert steering cables into the slots.
G
H
Main board
CP401
H
