(No.49846)1-5
2.1.4 Removing the heat sink
(See Fig.5)
• Prior to performing the following procedure, remove the front
panel assembly.
(1) Remove the two screws
C
and screw
D
attaching the heat
sink on the left side of the main body, and remove the heat
sink.
Fig.5
2.1.5 Removing the rear panel
(See Fig.6)
• Prior to performing the following procedure, remove the front
panel assembly and bottom cover.
(1) Remove the two screws
E
, three screws
F
and three
screws
G
attaching the rear panel on the back side of the
main body.
Fig.6
2.1.6 Removing the main board
(See Fig.7)
• Prior to performing the following procedures, remove the front
panel assembly, bottom cover, front chassis assembly, heat
sink and rear panel.
(1) Remove the two screws
H
attaching the main board on the
top chassis.
(2) Disconnect the connector CP701 on the main board from
the cassette mechanism assembly.
Fig.7
C
D
Heat sink
G
E
E
F
Rear bracket
F
H
Main board
CP701
H
