KS-FX834R
1-9
Prior to performing the following procedure, remove
the head relay P.W.B, the load arm, the sub chassis,
the cassette holder, the holder arm and the reel disc
P.W.B.
Remove the belt on the bottom of the cassette
mechanism ass’y.
Remove the slit washer attaching the flywheel on the
upper side of the cassette mechanism ass’y and pull
out the flywheel downward. Then remove another
flywheel in the same way.
1.
2.
3.
Removing the flywheel
(See Fig.10 and 12)
Prior to performing the following procedure, remove
the head relay P.W.B, the load arm, the sub chassis,
the cassette holder and the holder arm.
Disengage the part n inside of the reel driver which
engages with the shaft, using a pincette or
something like that. Then remove the reel driver from
the shaft.
Remove the reel driver spring and the reel table.
*
1.
2.
Removing the reel disc ass’y( )
(See Fig.12 to 14)
When reassembling, make sure to use
a new slit washer.
ATTENTION:
Fig.10
Cassette mechanism ass’y
Tab k
Reel disc P.W.B.
Soldering j
Tab k
G
G
Motor
Belt
Flywheel
Fig.12
Plate
The part n
Reel driver
Reel disc ass’y( )
Push aside
the gear
Tabs o
Reel disc
ass’y( )
The part n
Reel driver
Tab o
Fig.13
Reel driver
Shaft
The part n
Fig.14
Reel driver spring
Reel table
Slit washer
Slit washer
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
