20
ENGLISH
Other convenient tape functions
Skipping the blank portions on the tape
You can skip blank portions between the tunes. (Blank Skip)
When this function is on, the unit skips blank portions of 15 seconds or more, fast-forwards to
the next tune, then starts playing it.
• See also “Changing the general settings (PSM)” on page 26.
1. Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears
on the display.
2. Select “B. SKIP (blank skip)” with
¢
or
4
.
3. Select the desired mode with the control dial.
The Blank Skip mode alternates between on and off.
Note:
When the tape reaches its end while fast-forwarding, the tape direction will be changed automatically.
Playing the current tune repeatedly
You can play the current tune repeatedly. (Repeat Play)
Each time you briefly press RPT (Repeat) while playing a tape, Repeat
Play turns on and off alternately.
Note:
In the following cases, Blank Skip and Repeat Play may not operate correctly:
– Tapes with tunes having long pianissimo passages (very quiet parts) or non-recorded portions during
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between tunes.
– The Dolby NR setting does not match. For example, if Dolby B NR is on and the tape was recorded with
no Dolby NR.
RPT
Lights up when Repeat Play is turned on.
EN17-20.KS-FX850R[E]/f
00.1.20, 6:43 PM
20
