KS-FX915R/KS-FX815
1-4
Disassembly method
Removing the front chassis
(See Fig.1)
1. Remove two screws
A
and insert a screwdriver to the
joints
a
on the side of the front chassis and two joints
b
on the right side, then detach the front chassis toward the
front side.
Removing the heat sink
(See
Fig.2 )
1. Remove the three screws
B
attaching the heat sink on
the left side of the body, and remove the heat sink.
Removing the bottom cover
(See
Fig.3 )
1.
2.
Turn the body upside down.
Insert a screwdriver to the two joints c and two joints d on
both sides of the body and the joint e on the back of the
body, then detach the bottom cover from the body.
Fig.1
Fig.2
Front chassis
b
a
a
b
Heat sink
B
B
B
Fig. 3
Regulator board
e
d
c
A
A
Summary of Contents for KS-FX815
Page 25: ... M E M O 2 2 ...
