KS-FX611
1-9
Prior to performing the following procedure, remove
the head relay board and the sub chassis.
Remove the two screws
F
attaching the play head
(The spring under the play head comes off at the
same time).
1.
Removing the play head (See Fig.9)
Prior to performing the following procedure, remove
the head relay board and the sub chassis.
Push each tab
i
in the direction of the arrow and pull
out the pinch rollers on both sides.
1.
Removing the pinch roller ass’y
(See Fig.9)
Unsolder the soldering
j
on the reel disc board.
Push the seven tabs
k
on the bottom of the cassette
mechanism assembly in the direction of the arrow.
1.
2.
Removing the reel disc board
(See Fig.10)
l
of the motor and the sub
Release the sub motor from the three tabs
m
. Push
the sub motor upward and pull out it.
Remove the belt on the bottom of the cassette
mechanism assembly and remove the two screws
G
attaching the motor.
2.
3.
Removing the motor and the sub motor
(See Fig.10 and 11)
The motors can be detached before
removing the load arm.
ATTENTION:
Fig.8
Cassette holder
and holder arm
Joint h
Shaft
Shaft
Joint h
Fig.9
Tab i
Pinch roller ass’y
Pinch roller ass’y
F
Play head
Spring
Fig.11
Sub motor
Tab m
Load arm
Motor
Soldering l
Tab m
Soldering l
Tab m
Soldering j
Pinch roller ass’y
Tab i
Tab i
Tab i
Fig.10
Cassette mechanism ass’y
Tabs k
Reel disc board
Soldering j
Tabs k
G
G
Motor
Belt
Flyhwheel
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
