22
ENGLISH
KS-FX280 [EN] GET0061-001A [J]
— to use. When shipped from the factory, CD
changer is selected as the external component.
LINE IN:
To use the external component
other than CD changer
CHANGER: To use the CD changer
1
Change the source to FM, AM or TAPE.
2
Press and hold SEL for more than 2 seconds.
“CLOCK H”, “CLOCK M”,
“SCM LINK”, “LEVEL”,
“B.SKIP” or “EXT IN”
appears on the display.
3
Select “EXT IN” if not shown on the display.
4
Select the desired mode — “LINE IN”
or “CHANGER”.
5
Finish the setting.
Note:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
connection Manual (separate volume).
EXTERNAL COMPONENT OPERATIONS
LOUD
DISP
SEL
Multi
Music
Scan
MODE
SCM
CD CHANGER CONTROL
KS -FX 2 8 0
FM /AM
TAPE
CD
CH
You can connect the external component to the CD
changer jack on the rear using the Line Input
Adaptor KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
•
Before operating the external component using the
following procedure, select the external input
correctly. (See “Selecting the external component to
use” on page 22.)
1
Select the external component.
• If “LINE IN” does not appear
on the display, see page 22
and select the external input
(“EXT IN”).
Note on One-Touch Operation:
When you press
CD-CH
, the power automatically comes
on. You do not have to press
to turn on the power.
2
Turn on the connected device and start
playing the source.
3
Adjust the volume.
Selecting the external
component to use
You can connect the external component to the CD
changer jack on the rear using the Line Input
Adaptor KS-U57 (not supplied).
To use the external component as the playback
source through this receiver, you need to select
which device — CD changer or external component
CD
CH
To turn up the
volume
To turn down the
volume
FM /AM
TAPE
CD
CH
SEL
SEL
EN22-KS-FX280[J]-5
30/11/01, 9:00 AM
22
