ENGLISH
36
Symptoms
Remedies/Causes
MP3/WMA playback
• Disc cannot be played back.
• Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the file
names.
• Noise is generated.
Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or WMA
tracks.)
• A longer readout time is required
(“READING” keeps flashing on the
display).
Do not use too many hierarchical levels and folders.
• Tracks do not play back in the order you
have intended them to play.
The playback order is determined when the files are
recorded.
• The elapsed playing time is not correct.
This sometimes occurs during playback. This is caused by
how the tracks are recorded on the disc.
• “NO FILE” appears on the display.
Selected folder is an empty folder
*
1
. Select another folder
that contains MP3/WMA tracks.
• “NOT SUPPORT” appears on the display
and track skips.
Check whether the track is a playable file format.
• The correct characters are not displayed
(e.g. album name).
This unit can only display letters (upper case), numbers,
and a limited number of symbols. (See page 24.)
USB device playback
• Noise is generated.
The track played back is not an MP3/WMA track. Skip to
another file. (Do not add the extension code <.mp3> or
<.wma> to non-MP3 or WMA tracks.)
• “READING” keeps flashing on the display.
• Readout time varies depending on the USB device.
• Do not use too many hierarchy or folders.
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly
while “READING” is displayed on the display.
• “NO FILE” appears on the display.
Check whether the selected folder, the connected USB
device, or the iPod/iPhone contains a playable file.
*
1
Folder that is physically empty or folder that contains data but does not contain valid MP3/WMA track.
EN32-43_KD-A605[J]f.indd 36
EN32-43_KD-A605[J]f.indd 36
11/12/08 4:43:07 PM
11/12/08 4:43:07 PM
