18
BLUETOOTH®
Bluetooth mode settings
1
Press and hold
.
2
Turn the volume knob to select [
BLUETOOTH
], then press the knob.
3
Turn the volume knob to select an item
(
see the following table
)
, then press
the knob.
4
Repeat step
3
until the desired item is selected/activated or follow the
instructions stated on the selected item.
5
Press
to exit.
To return to the previous setting item, press
.
Default:
XX
PHONE
*
1
Selects the phone or audio device to connect or disconnect.
“ ” appears in front of the device name when connected.
AUDIO
*
1
APPLICATION
*
1
Shows the connected phone name using the JVC Smart Music Control
*
2
app.
“ ” appears in front of the device name when connected.
DELETE PAIR
1
Turn the volume knob to select a device to delete, then press the knob.
2
Turn the volume knob to select [
YES
] or [
NO
], then press the knob.
SET PINCODE
(0000)
Changes the PIN code (up to 6 digits).
1
Turn the volume knob to select a number.
2
Press
to move the entry position.
Repeat
steps
1
and
2
until you finish entering the PIN code.
3
Press the volume knob to confirm.
AUTO CNNCT
ON
: The unit automatically reconnect when the last connected Bluetooth device is
within range. ;
OFF
: Cancels.
AUTO PAIR
ON
: The unit automatically pair supported Bluetooth device (iPhone/ iPod touch/
Android device) when it is connected through USB input terminal. Depending on the
operating system of the connected device, this function may not work. ;
OFF
: Cancels.
INITIALIZE
YES
: Initializes all the Bluetooth settings (including stored pairing, phonebook, and
etc.). ;
NO
: Cancels.
INFORMATION
MY
BT
NAME
: Displays the unit name (JVC UNIT). ;
MY
ADDRESS
: Shows address of this unit.
*
1
You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at any time.
*
2
JVC Smart Music Control is designed to view JVC car receiver status and perform simple control
operations on Android smart phones.
For JVC Smart Music Control operations, visit JVC website: <http://www.jvc.net/cs/car/>.
Bluetooth compatibility check mode
You can check the connectivity of the supported profile
between the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold
.
“BLUETOOTH” “CHECK MODE” appears. “SEARCH NOW
USING PHONE” “PIN IS 0000” scrolls on the display.
2
Search and select “JVC UNIT” on the Bluetooth device
within 3 minutes.
3
Perform (A), (B) or (C) depending on what appears on the
display.
(A) “PAIRING” “XXXXXX” (6-digit passkey)
: Ensure that
the same passkey appears on the unit and Bluetooth
device, then operate the Bluetooth device to confirm the
passkey.
(B) “PAIRING” “PIN IS 0000”
: Enter “0000” on the
Bluetooth device.
(C) “PAIRING”
: Operate the Bluetooth device to confirm
pairing.
After pairing is successful, “PAIRING OK” “[Device Name]”
appears and Bluetooth compatibility check starts.
If “CONNECT NOW USING PHONE” appears, operate the
Bluetooth device to allow phonebook access to continue.
“TESTING” flashes on the display.
The connectivity result flashes on the display.
“PAIRING OK” and/or “H.FREE OK”*
1
and/or “A.STREAM OK”*
2
and/or “PBAP OK”*
3
: Compatible
*
1
Compatible with Hands-Free Profile (HFP)
*
2
Compatible with Advanced Audio Distribution Profile (A2DP)
*
3
Compatible with Phonebook Access profile (PBAP)
After 30 seconds, “PAIRING DELETED” appears to indicate that
pairing has been deleted, and the unit exits check mode.
• To cancel, press and hold
to turn off the power,
then turn on the power again.
JS_JVC_KD_X330BTS_X33MBS_K_EN_1.indd 18
29/9/2015 3:55:36 PM
