JVC KD-X310BT, Instruction Manual

Page: 16 / 82

14
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BLUETOOTH®
Bluetooth mobile phone
To Do this
Receive a call
Press or the volume knob.
On RM-RK52: Press J / K / H / I .
• When [AUTO ANSWER] is set to the selected time, the
unit answers incoming call automatically. ( 16)
Reject an
incoming call
Press and hold or the volume knob.
On RM-RK52: Press and hold
J
/
K
/
H
/
I
.
End a call
Press and hold or the volume knob.
On RM-RK52: Press and hold
J
/
K
/
H
/
I
.
Activate or
deactivate
hands-free
mode
Press the volume knob during a call.
• Operations may vary according to the connected
Bluetooth mobile phone.
Adjust the
phone volume Turn the volume knob during a call.
Phone volume: [00] to [50] (Default: [15] )
• This adjustment will not affect the volume of the
other sources.
Switch between
two connected
phones
Press repeatedly.
• Not applicable during a call.
Bluetooth compatibility check mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device connected.
1
Press and hold .
“BLUETOOTH” “CHECK MODE” appears. “SEARCH NOW USING
PHONE” “PIN IS 0000” scrolls on the display.
2
Search and select “JVC UNIT” on the Bluetooth device within
3 minutes.
3 Perform (A), (B) or (C) depending on what appears on the display.
(A) “PAIRING” “XXXXXX” (6-digit passkey) : Ensure that the same
passkey appears on the unit and Bluetooth device, then operate
the Bluetooth device to confirm the passkey.
(B) “PAIRING” “PIN IS 0000” : Enter “0000” on the Bluetooth device.
(C) “PAIRING” : Operate the Bluetooth device to confirm pairing.
After pairing is successful, “PAIRING OK” “[Device Name]” appears and
Bluetooth compatibility check starts.
If “CONNECT NOW USING PHONE” appears, operate the Bluetooth device
to allow phonebook access to continue.
The connectivity result flashes on the display.
“PAIRING OK” and/or “H.FREE OK”*
1
and/or “A.STREAM OK”*
2
and/or
“PBAP OK”*
3
: Compatible
* 1 Compatible with Hands-Free Profile (HFP)
*
2 Compatible with Advanced Audio Distribution Profile (A2DP)
* 3
Compatible with Phonebook Access Profile (PBAP)
After 30 seconds, “PAIRING DELETED” appears to indicate that pairing has
been deleted, and the unit exits check mode.
• To cancel, press and hold
B
/SOURCE to turn off the power, then turn
on the power again.
JS_JVC_KD_X310BT_J_02_EN.indd 14 12/13/2013 4:16:34 PM