Using the SETTINGS menu
1
Enter the hands-free menu.
2
Select <SETTINGS>.
To return to the previous menu, press
.
To exit from the menu, press
.
3
Repeat this step to perform the necessary
settings.
The following settings are applicable to the paired device. If another device is paired, perform the
settings again.
Menu item
Selectable setting (Initial: [XX])
P.BOOK SEL
*
[PB IN PHONE]
: The unit browses the phonebook of the connected phone.
PB IN UNIT
: The unit browses the phonebook registered in the unit. (You can
copy the phonebook memory using
<
P.BOOK WAIT
>
(
'
page 22).)
AUTO ANSWER
03 SEC
/
05 SEC
/
10 SEC
: The unit answers incoming calls automatically in
3/5/10 seconds.
[OFF]
: Cancels.
RING TONE
[IN UNIT]
: The unit rings to notify you when a call/text message comes in.
–
CALL
: Select your preferred ring tone (
TONE 1 — 5
) for incoming calls.
–
MESSAGE
: Select your preferred ring tone (
TONE 1 — 5
) for incoming text
messages.
Default ring tone is different according to the paired device.
IN PHONE
: The unit uses the connected phones’ ring tone to notify you when a
call/text message comes in. (The connected phone will ring if it does not
support this feature.)
ECHO CANCEL
(01 — 10)
[04]
: Adjust the echo cancellation delay time until the least echo is
being heard during a phone conversation.
MIC LEVEL
(01 — 03)
[02]
: The sensitivity of the microphone increases as the number is
increased.
MSG NOTICE
[ON]
: The unit rings and
“
RCV MESSAGE
”
#
“
[Device Name]
”
appears to notify
you of an incoming text message.
OFF
: Cancels.
* Selectable only when the connected phone supports PBAP.
Bluetooth mobile phone
ENGLISH
ޓ
|
17
2012/11/22
ޓ
10:10:26
KD-X250BT_J_EN
