12
ENGLISH
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
[SUBWOOFER
SET]
[ON]
: Turns on the subwoofer output. ;
[OFF]
: Cancels.
[SUBWOOFER
LPF]
*1
[FRQ THROUGH]
: All signals are sent to the subwoofer. ;
[FRQ 55HZ]
/
[FRQ 85HZ]
/
[FRQ 120HZ]
: Audio signals with frequencies lower
than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
[SUB.W
PHASE]
*1*3
[REVERSE]
(180°)/
[NORMAL]
(0°): Selects the phase of the subwoofer output
to be in line with the speaker output for optimum performance.
[FADER]
[POSITION R06]
to
[POSITION F06]
(
[POSITION 00]
): Adjusts the front and
rear speaker output balance.
[BALANCE]
*4
[POSITION L06]
to
[POSITION R06]
(
[POSITION 00]
): Adjusts the left and
right speaker output balance.
[VOLUME
ADJUST]
[LEVEL –15]
to
[LEVEL +06]
(
[LEVEL 00]
): Presets the initial volume level of
each source by comparing to the FM volume level. (Before adjustment, select
the source you want to adjust. “VOL ADJ FIX” appears if FM is selected.)
[AMP GAIN]
[LOW POWER]
: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging the
speakers.) ;
[HIGH POWER]
: The maximum volume level is 35.
[D.T.EXPANDER]
(Digital Track
Expander)
[ON]
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in audio
data compression. ;
[OFF]
: Cancels.
[SPK/PRE OUT]
Depending on the speaker connection method, select the appropriate setting
for the desired output. (See the following “Speaker output settings”.)
*1 Displayed only when
[SUBWOOFER SET]
is set to
[ON]
.
*2 Displayed only when
[SPK/PRE OUT]
is set to
[SUB.W/SUB.W]
.
*3 Selectable only if a setting other than
[FRQ THROUGH]
is selected for
[SUBWOOFER LPF]
.
*4 This adjustment will not affect the subwoofer output.
Speaker output settings
[SPK/PRE OUT]
Select the output setting for the speakers
[SPK/PRE OUT]
, based on the speaker
connection method.
Connection via lineout terminals
For connections through an external amplifier. (Page 18)
Setting on
[SPK/PRE OUT]
Audio signal through lineout terminal
FRONT
REAR
SW
[REAR/REAR]
(default) Front speakers
output
Rear speakers output
Subwoofer output
[SUB.W/SUB.W]
Front speakers
output
L (left): Subwoofer output
R (right): (Mute)
Subwoofer output
Connection via speaker leads
You can also connect the speakers without using an external amplifier
but still being able to enjoy the subwoofer output with these settings.
(Page 18)
Setting on
[SPK/PRE OUT]
Audio signal through rear speaker lead
L (left)
R (right)
[REAR/REAR]
Rear speakers output
Rear speakers output
[SUB.W/SUB.W]
Subwoofer output
(Mute)
If
[SUB.W/SUB.W]
is selected:
–
[FRQ 120HZ]
is selected in
[SUBWOOFER LPF]
and
[FRQ THROUGH]
is not available.
–
[POSITION R01]
is selected in
[FADER]
and selectable range is
[POSITION R06]
to
[POSITION 00]
.
Audio Settings
JS_JVC_KD_X172M_M2_EN_3.indd 12
JS_JVC_KD_X172M_M2_EN_3.indd 12
6/12/2019 12:25:50 PM
6/12/2019 12:25:50 PM
