KD-SX995
(No.49792)1-5
2.1.3 Removing the heat sink
(See Fig.5)
(1) Remove the two screws
C
and two screws
D
on the left
side of the main body.
Fig.5
2.1.4 Removing the bottom cover
(See Figs.6 and 7)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly and heat sink.
(1) Turn over the main body and release the two joints
d
, two
joints
e
and joint
f
.
CAUTION:
Do not damage the main board when releasing the joint
f
using
a screwdriver. (See Figs.6 and 7)
Fig.6
Fig.7
2.1.5 Removing the rear bracket
(See Fig.8)
• Prior to performing the following procedure, remove the front
panel assembly, front chassis assembly, heat sink and bottom
cover.
(1) Remove the three screws
E
, three screws
F
and three
screws
G
on the back side of the main body.
(2) Remove the rear bracket.
REFERENCE:
During reassembly, before fixing the rear bracket onto the
main body, insert the Subwoofer cable into the slot.
Fig.8
C
D
Heat sink
Joint
d
Joint
e
Joint
f
Bottom cover
Joint
e
Joint
d
Joint
f
Bottom cover
F
G
E
E
Rear bracket
G
F
Insert Subwoofer cable
into the slot.
Summary of Contents for KD-SX995
Page 53: ...KD SX995 No 49792 1 53 ...
Page 63: ...KD SX995 M E M O ...
