24
ENGLISH
Symptoms
Remedies/Causes
MP3/WMA playback
• Tracks do not play back in the order you
have intended them to play.
Playback order is determined when the files are recorded.
• Elapsed playing time is not correct.
This sometimes occurs during play. This is caused by how the
tracks are recorded on the disc.
• “NO FILES” appears on the display.
Insert a disc that contains MP3/WMA tracks.
• Correct characters are not displayed (e.g.
album name).
This unit can only display letters (upper case), numbers, and a
limited number of symbols.
CD changer
• “NO DISC” appears on the display.
Insert a disc into the magazine.
• “NO MAG” appears on the display.
Insert the magazine.
• “RESET 8” appears on the display.
Connect this unit and the CD changer correctly and press the
reset button of the CD changer.
• “RESET 1” – “RESET 7” appears on the
display.
Press the reset button of the CD changer.
• The CD changer does not work at all.
Reset the unit (see page 2).
iPod/D. player playback
• The iPod or D. player does not turn on or
does not work.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Buttons do not work as intended.
The functions of the buttons have been changed. Press MODE
before performing the operation.
• The sound is distorted.
Deactivate the equalizer either on the unit or the iPod/
D. player.
• “NO IPOD” or “NO DP” appears on the
display.
• Check the connecting cable and its connection.
• Charge the battery.
• Playback stops.
The headphones are disconnected during playback. Restart
the playback operation using the control panel (see page 17).
• No sound can be heard when
connecting an iPod nano.
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
• No sound can be heard.
• “ERROR 01” appears on the display
when connecting a D. player.
Disconnect the adapter from the D. player. Then, connect it
again.
• “NO FILES” or “NO TRACK” appears on
the display.
No tracks are stored. Import tracks to the iPod or D. player.
• “RESET 1” – “RESET 7” appears on the
display.
Disconnect the adapter from both the unit and iPod/D. player.
Then, connect it again.
• “RESET 8” appears on the display.
Check the connection between the adapter and this unit.
• The iPod’s or D. player’s controls do not
work after disconnecting from this unit.
Reset the iPod or D. player.
EN20-25_SV3305_007A_f.indd 24
EN20-25_SV3305_007A_f.indd 24
1/30/07 10:36:18 AM
1/30/07 10:36:18 AM