background image

10

To go to the next or previous folders (only for 
MP3 or WMA discs) 

For MP3 discs: 

   

For WMA discs: 

1

2

To locate a particular track (for CD or VCD with 
PBC set to “PBC OFF”) or folder (for MP3 or 
WMA discs) directly

To select a number from 01 – 06:

To select a number from 07 – 12:

•  To use direct folder access on MP3/WMA 

discs, it is required that folders are assigned 
with 2-digit numbers at the beginning of their 
folder names—01, 02, 03, and so on.

  To select a particular track in a folder (for 

MP3 or WMA discs):

Ÿ

  Select a disc.

 

For disc number from 01 – 06:

 

For disc number from 07 – 12:

About MP3 and WMA discs

MP3 and WMA “tracks” (words “file” and 
“track” are used interchangeably) are recorded 
in “folders.”

About the CD changer

It is recommended to use a JVC 
MP3-compatible CD changer with your unit.
•  You can also connect MP3-incompatible 

CD changers. However, these units are not 
compatible with MP3 discs.

•  You cannot use the CH-X99, CH-X100, and 

KD-MK series CD changers with this unit.

•  You cannot control and play any WMA or 

VCD disc in the CD changer.

•  Disc text information recorded in the CD 

Text can be displayed when a JVC CD Text 
compatible CD changer is connected.

•  For connection, see Installation/Connection 

Manual (separate volume).

To fast-forward or reverse the track

To go to the next or previous tracks

EN08-13_KD-SV3204[UI]2.indd   10

EN08-13_KD-SV3204[UI]2.indd   10

1/23/06   5:53:13 PM

1/23/06   5:53:13 PM

Summary of Contents for KD-SV3204



























Reviews: