ENGLISH
15
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Bluetooth mode settings
1
Press and hold
.
2
Turn the volume knob to select an item
(
see the following table
)
, then press the knob.
3
Repeat step
2
until the desired item is selected/activated or follow the instructions
stated on the selected item.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
XX
BT MODE
PHONE SELECT
*
Selects the phone or audio device to connect or disconnect.
“ ” appears in front of the device name when connected.
“
” appears in front of the current playback audio device.
AUDIO SELECT
*
DEVICE DELETE
1
Turn the volume knob to select a device to delete, then press the knob.
2
Turn the volume knob to select
[YES]
or
[NO]
, then press the knob.
PIN CODE EDIT
(0000)
Changes the PIN code (up to 6 digits).
1
Turn the volume knob to select a number.
2
Press
to move the entry position.
Repeat
steps
1
and
2
until you finish entering the PIN code.
3
Press the volume knob to confirm.
RECONNECT
ON
: The unit automatically reconnect when the last connected Bluetooth device is within range. ;
OFF
: Cancels.
AUTO PAIRING
ON
: The unit automatically pair supported Bluetooth device (iPhone/iPod touch/Android device)
when it is connected through USB input terminal. Depending on the operating system of the
connected device, this function may not work. ;
OFF
: Cancels.
INITIALIZE
YES
: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ;
NO
: Cancels.
INFORMATION
MY
BT
NAME
: Displays the unit name (“KD-SR8 BT”). ;
MY
ADDRESS
: Shows address of this unit.
*
You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at any time.
BLUETOOTH®
Bluetooth compatibility check mode
You can check the connectivity of the supported
profile between the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold
.
“BLUETOOTH” “CHECK MODE” appears.
“SEARCH NOW USING PHONE” “PIN IS 0000”
scrolls on the display.
2
Search and select “KD-SR8 BT” on the Bluetooth
device within 3 minutes.
3
Perform (A), (B) or (C) depending on what
appears on the display.
(A) “PAIRING” “XXXXXX” (6-digit passkey)
:
Ensure that the same passkey appears on the
unit and Bluetooth device, then operate the
Bluetooth device to confirm the passkey.
(B) “PAIRING” “PIN IS 0000”
: Enter “0000” on
the Bluetooth device.
(C) “PAIRING”
: Operate the Bluetooth device to
confirm pairing.
After pairing is successful, “PAIRING OK” “[Device
Name]” appears and Bluetooth compatibility check
starts.
If “CONNECT NOW USING PHONE” appears, operate
the Bluetooth device to allow phonebook access to
continue.
“TESTING” flashes on the display.
JS_JVC_KD_SR83BT_K_EN_1.indd 15
JS_JVC_KD_SR83BT_K_EN_1.indd 15
12/23/2016 12:14:28 PM
12/23/2016 12:14:28 PM
