KD-SH707
1-11
Remove the four screws
V
attaching the rear panel
to the front panel assembly.
Release the eleven joints
g
of the front panel and the
rear panel.
Disconnect the wire from connector CN803 on the
front board.
If necessary, unsolder the front board.
1.
2.
3.
4.
<Front panel assembly>
Removing the front board
(See Fig.25 and 26)
Prior to performing the following procedure, remove
the rear panel.
Remove the four screws
W
attaching the volume
board.
Disconnect the volume knob, ring lens and volume
ring from the volume board.
If necessary, unsolder the volume board.
1.
2.
3.
Removing the volume board
(See Fig.26 and 27)
Prior to performing the following procedure, remove
the rear panel.
Disconnect the wire from connector CN803 on the
front board.
Pull out the line in board from the front panel
assembly.
(See Fig.26 and 28)
Prior to performing the following procedure, remove
the front panel assembly.
Fig.25
Fig.26
Fig.27
Fig.28
Joint g 11
Rear panel
V
V
V
V
Front board
Soldering
Soldering
Volume board
W
W
W
W
CN803
Line in board
Ring knob
Volume lens, Volume ring
Volume board
Line in board
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
