KD-S675
1-10
Prior to performing the following procedure, remove
the CD mechanism control board, the front bracket
(loading motor) and the CD mechanism assembly.
Remove the two screws
F
and the feed motor
assembly.
1.
Removing the feed motor assembly
(See Fig.10)
Prior to performing the following procedure, remove
the CD mechanism control board, the front bracket
(loading motor), the CD mechanism assembly and
the feed motor assembly.
Detach the FD gear part of the pickup unit upward.
Then remove the pickup unit while pulling out the
part
i
of the FD screw.
1.
Remove the screw
G
attaching the nut push spring
plate and the pickup mount nut from the pickup unit.
Pull out the FD screw.
2.
Removing the pickup unit
(See Fig.10 and 11)
When reattaching the pickuap unit,
reattach the part
j
of the pickup unit,
then the part
i
of the FD screw.
ATTENTION:
Turn up the CD mechanism assembly and remove
the two springs
on both sides of the clamper arms.
Turn the turn table, and remove the two screws
H
and the spindle motor.
2.
Removing the spindle motor
Fig.10
Fig.11
Fig.12
Fig.13
Spindle motor
k
k
Pickup unit
Part i
FD screw
Feed motor assembly
FD gear
Pickup unit
Part j
F
Nut push spring plate
Pickup mount nut
Pickup unit
FD screw
G
H
H
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
