34
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
STEERING
WHEEL
REMOTE
(For
KD-R975BTS
)
USB cable (DC 5 V
1.5 A)
(approx. 1.2 m/4 feet)
Car fuse block
Ignition switch
Light blue/yellow
Blue/white: To amplifier
Blue: To power antenna
Make this connection if your vehicle factory wiring
harness does not have “12 V ignition switch” wire.
Separate red wire
Wiring connection
(for
KD-R975BTS / KD-R970BTS
/
KD-R97MBS
/
KD-R875BTS
)
Signal cord (not supplied)
Remote wire (not supplied)
To the steering wheel
remote control adapter
Fuse (10 A)
Antenna terminal
JVC Amplifier
*
1
Factory wiring
harness (vehicle)
Black: Ground
Yellow: Battery 12 V
White: Front speaker/For 3-way crossover: mid range speaker (left)
White/black
Gray: Front speaker/For 3-way crossover: mid range speaker (right)
Gray/black
Purple: Rear speaker/For 3-way crossover: Tweeter (right)
Purple/black
Join the same color wires together.
Red: Ignition 12 V
Orange/white: Illumination
(Not used)
Blue/white: Remote (200 mA max.)
MIC (Microphone input
terminal)
( 14)
Expansion port (12 V
500 mA)
To the optional SiriusXM Vehicle Tuner
(commercially available)
( 11)
Output terminals (
33
)
Brown
Green: Rear speaker
*
2
/For 3-way crossover: Tweeter (left)
Green/black
*
2
*
1
Firmly connect the ground wire of the amplifier to the
car’s chassis to avoid damaging the unit.
*
2
You can also connect a subwoofer speaker directly
using this lead without an external subwoofer
amplifier. For setting,
22
.
Custom wiring
harness
(separately
purchased)
IMPORTANT
We recommend installing the unit with a commercially
available custom wiring harness specific for your car and
leave this job to professionals for your safety. Consult your
car audio dealer.
Vehicle
dashboard
Recommended connection
JS_JVC_KD_R975BTS_K_EN_8.indd 34
JS_JVC_KD_R975BTS_K_EN_8.indd 34
28/9/2015 11:26:51 AM
28/9/2015 11:26:51 AM
