Menu item
Selectable setting (Initial: [XX])
AUDIO
FADER
*3*4
R06 — F06
[00]
: Adjusts the front and rear speaker output balance.
BALANCE
*4
L06 — R06
[00]
: Adjusts the left and right speaker output balance.
LOUD
(Loudness)
ON
: Boosts low and high frequencies to produce a well-balanced sound at
a low volume level.
[OFF]
: Cancels.
VOL ADJUST
(Volume adjust)
-05 — +05
[00]
: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. (
“
VOL ADJ FIX
”
appears if
“
FM
”
is selected.)
SUB. W
(Subwoofer)
OFF
: Cancels.
[ON]
: Turns on the subwoofer output.
SUB.W LPF
*5
(Subwoofer low-
pass filter)
LOW 55Hz
/
MID 85Hz
/
[HIGH 120Hz]
: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W LEVEL
*5
(Subwoofer level)
00 — 08
[08]
: Adjusts the subwoofer output level.
HPF
*5
(High-pass filter)
LOW 100Hz
/
MID 120Hz
/
HIGH 150Hz
: Activates the High Pass Filter.
Audio signal with frequencies lower than 100 Hz/120 Hz/150 Hz are cut off
from the front/rear speakers.
[OFF]
: Deactivates. (All signals are sent to the front/rear speakers.)
BEEP
(Keytouch tone)
[ON]
/
OFF
: Activates or deactivates the keypress tone.
AMP GAIN
*6
(Amplifier gain)
LOW POWER
: VOLUME 00 — VOLUME 30 (Select if the maximum power of
each speaker is less than 50 W to prevent damaging the speakers.)
[HIGH POWER]
: VOLUME 00 — VOLUME 50
TUNER
SSM
For settings,
'
page 6. (Displayed only when the source is
“
FM
”
.)
MONO
(Monaural mode)
Displayed only when the source is
“
FM
”
.
[OFF]
: Enables stereo FM reception.
ON
: Improves the FM reception but stereo effect will be lost.
IF BAND
(Intermediate
frequency band)
[AUTO]
: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
WIDE
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
RADIO TIMER
For settings,
'
page 7.
*3
If you are using a two-speaker system, set the fader level to “00”.
*4
This adjustment will not affect the subwoofer output.
*5
Displayed only when <SUB.W> is set to <ON>.
*6
The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER>
with the volume level set to higher than “VOLUME 30”.
Menu operations
ENGLISH
ޓ
|
21
2011/11/18
ޓ
19:25:31
KD-R736BT_U_EN
