JVC KD-R726, Instructions Manual

Page: 14 / 53

14 ENGLISH
To select a contact from the phonebook
1
Select PHONEBOOK calling method.
(page 12)
2
Press
5
/
∞
to show the search menu
(A to Z, 0 to 9, and OTHERS).
“OTHERS” appears if the 1st character is not
A to Z, or 0 to 9, such as #, —, !, and etc.
3
Press
5
/
∞
to select your desired
character, then press the control dial to
confirm.
The name list of the selected character
appears.
4
Turn the control dial to select your
desired contact, then press to confirm.
• Only the existing characters will be shown on
the search menu.
• Press and hold
5
/
∞
to continuously change
the character of the search menu.
• If your phonebook contains many contacts,
searching take some time.
To delete a contact (name/phone number)
Only when “PB IN UNIT” is selected for
“P. BOOK SEL.” (page 13)
1
Press FUNC. to enter “Hands-Free” screen.
2
Display the list of name/phone numbers
using one of the calling methods.
(page 12)
3
Turn the control dial to select the name/
phone number you want to delete.
4
Press and hold BACK to enter the
“Delete Entries” screen.
5
Turn the control dial to select “DELETE” or
“DELETE ALL.”
• If “DELETE” is selected, the selected name/
phone number in step
3
is deleted.
• If “DELETE ALL” is selected, the listed
numbers in step
2
selection are deleted.
6
Press the control dial to confirm.
Receiving/ending a phone call
When a call comes in, the source is
automatically changed to “BT FRONT/ BT REAR.”
• “RECEIVING” appears for a while, then the
phone number or name appears.
• The display will flash in blue. (“RING COLOR,”
page 13)
When <AUTO ANSWER> is activated....
The unit answers the incoming calls
automatically.
• Press
FUNC. or the control dial to answer
the incoming call when <AUTO ANSWER> is
deactivated.
During a phone call conversation...
• Turn the control dial to adjust the phone
volume level (00 – 50). [ Initial: VOLUME 15 ]
The adjustment made will not affect the other
sources.
• Press
5
/
∞
to adjust the microphone
sensitivity (01 – 03). (As the number increases,
the microphone becomes more sensitive.)
• Press
4
/
¢
to turn on/off the
Noise Reduction and Echo Cancelation mode.
To end an incoming call, press and hold
FUNC. or the control dial.
Using the remote controller
5
/
∞
/
2
/
3
/ SOURCE : [Press] Answers calls.
[Hold] Rejects calls.
To switch conversation media (the unit/
mobile phone)
Press the control dial during a phone call
conversation, then continue your conversation
using the other media.
• Operations may be different according to the
connected Bluetooth device.
EN02-27_KD-R726_001A_3.indd 14 EN02-27_KD-R726_001A_3.indd 14 12/28/10 3:04:24 PM 12/28/10 3:04:24 PM