JVC KD-R701E, Service Manual

Page: 9 / 53

(No.MA445<Rev.001>)1-9
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
SECTION 3
DISASSEMBLY
3.1 Main body (Used figure are KD-R701)
3.1.1 Removing the Bottom chassis (See Fig.1)
(1) Remove the two screws A and one screw B attaching the
Heat sink.
(2) Remove the one screw C attaching the RCA jack.
(3) Remove the one screw D attaching the Bottom chassis.
(4) Slide to backward and then remove the Bottom chassis.
Fig.1
3.1.2 Removing the Front chassis (See Fig.2)
(1) Remove the two screws E attaching the both side of the
Front chassis.
(2) Disengage four hooksaengaged both side of the Front
chassis.
Fig.2
3.1.3 Removing the Main board (See Fig.3 to 5)
(1) Remove the two screws F and one screw G attaching the
Side panel. (See Fig.3)
Fig.3
(2) Remove the one screw H attaching the CD-CH jack. (See
Fig.4)
Fig.4
(3) Remove the three screws J attaching the Main board. (See
Fig.5)
(4) Disconnect the board to board connector CN501 connect-
ed to CD mechanism. (See Fig.5)
Fig.5
3.1.4 Removing the CD mechanism (See Fig.6)
(1) Remove the three screws K attaching the CD mechanism.
Fig.6
A B C D A
E
hook
a
hook
a
F G F
H
J
J
CN501
K
K
K