Menu item
Selectable setting (Initial: [XX])
AUDIO
SUB. W
*5
(Subwoofer)
OFF
: Cancels.
[ON]
: Turns on the subwoofer output.
SUB.W LPF
*6
(Subwoofer low-
pass filter)
LOW 55Hz
/
MID 85Hz
/
[HIGH 120Hz]
: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W LEVEL
*6
(Subwoofer level)
00 — 08
[08]
: Adjusts the subwoofer output level.
HPF
*6
(High-pass filter)
ON
: Activates the High Pass Filter. Low frequency signals are cut off from
the front/rear speakers.
[OFF]
: Deactivates. (All signals are sent to the front/rear speakers.)
BEEP
(Keytouch tone)
[ON]
/
OFF
: Activates or deactivates the keypress tone.
TEL MUTING
*7
(Telephone
muting)
ON
: Mutes the sounds while using the cellular phone (not connected
through KS-BTA100).
[OFF]
: Cancels.
AMP GAIN
(Amplifier gain)
LOW POWER
: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[HIGH POWER]
: The maximum volume level is 50.
TUNER
SSM
For settings,
'
page 6. (Displayed only when the source is
“
FM
”
.)
AREA
(Frequency
tuning interval)
[AREA US]
: For North/Central/South America, AM/FM intervals: 10
kHz/200
kHz.
AREA EU
: For any other areas, AM/FM intervals: 9
kHz/50
kHz.
AREA SA
: For some South American countries, AM/FM intervals: 10
kHz/50
kHz.
MONO
(Monaural mode)
Displayed only when the source is
“
FM
”
.
[OFF]
: Enables stereo FM reception.
ON
: Improves the FM reception but stereo effect will be lost.
IF BAND
(Intermediate
frequency band)
[AUTO]
: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
WIDE
: Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
RADIO TIMER
For settings,
'
page 6.
IPOD SWITCH
(iPod/iPhone control)
[HEAD MODE]
/
IPOD MODE
/
EXT MODE
:
For settings,
'
page 8. (Displayed only when the source is
“
USB-IPOD
”
.)
SRC SELECT
AM
*8
[ON]
/
OFF
: Enables or disables
“
AM
”
in source selection.
F-AUX
*8
(Front auxiliary
input)
[ON]
/
OFF
: Enables or disables
“
F-AUX
”
in source selection.
R-AUX
*8
(Rear auxiliary
input)
ON
/
OFF
: Enables or disables
“
R-AUX
”
in source selection.
[BT ADAPTER]
: Select if the rear auxiliary input jack is connected to the
Bluetooth adapter, KS-BTA100 (
'
page 10). The source name will be
changed to
“
BT AUDIO
”
.
*5
Displayed only when <L/O MODE> is set to <SUB.W>.
*6
Displayed only when <SUB.W> is set to <ON>.
*7
This setting does not work if <BT ADAPTER> is selected for <R-AUX> of <SRC SELECT>.
*8
Displayed only when the unit is in any source other than the corresponding source “AM/
F-AUX/R-AUX/BT AUDIO”.
Menu operations
ENGLISH
ޓ
|
13
2012/1/20
ޓ
12:14:42
KD-R54_J_EN