background image

2

CONTENTS

BEFORE USE

BEFORE USE 

2

BASICS 

3

GETTING STARTED 

4

RADIO 

5

CD / USB / iPod 

6

How to read this manual

•  Operations explained mainly using 

buttons on the faceplate of 

KD-R446

 / 

KD-R445

 / 

KD-R444

.

• 

[XX]

 indicates the selected items. 

• 

(

 XX)

 indicates references are available 

on the stated page number. 

 Warning

  Do not operate any function that takes your attention away from safe driving.

 Caution

 

Volume setting:

•  Adjust the volume so that you can hear sounds outside the car to prevent accident.
•  Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of 

the output level.

 

General:

•  Avoid using the USB device or iPod/iPhone if it might hinder driving safety. 
•  Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.
•  Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.
•  If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

 

Remote control (RM-RK52):

•  Do not leave the remote control in hot places such as on the dashboard.
•  The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or 

equivalent type.

•  The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
•  Keep battery out of reach of children and in original package until ready to use. Dispose of used batteries 

promptly. If swallowed, contact a physician immediately.

2

Maintenance

Cleaning the unit:

 Wipe off dirt on the faceplate with a dry silicon or soft cloth.

Cleaning the connector:

 Detach the faceplate and clean the connector with a 

cotton swab gently, being careful not to damage the connector.

Handling discs:

•  Do not touch the recording surface of the disc.
•  Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
•  Do not use any accessories for the disc.
•  Clean from the center of the disc and move outward.
•  Clean the disc with a dry silicon or soft cloth. Do not use any solvents.
•  When removing discs from this unit, pull them out horizontally.
•  Remove burrs from the center hole and disc edge before inserting a disc.

AUX 

7

ILLUMINATION 

(

KD-R646

 only) 

7

Connector (on the reverse 
side of the faceplate)

AUDIO SETTINGS 

8

MORE INFORMATION 

9

TROUBLESHOOTING 

10

SPECIFICATIONS 

11

INSTALLATION / CONNECTION 

12 

EN_KD-R646[U]001A_f.indd   2

EN_KD-R646[U]001A_f.indd   2

2/27/13   8:56:40 AM

2/27/13   8:56:40 AM

Summary of Contents for KD-R444















Reviews: