(No.MA538<Rev.003>)15/18
4.2
Service Information Clear Mode
4.2.1 Default status immediately after the mode activation
* The receiver is connected with the DC power supply (with the power supply turned off).
Operating Key: [BACK] + [POWER] Press and hold + DC power supply turned ON
4.2.2 How to release each Test mode
• Reset
• Acc off
• Power off
• Panel Detach
4.2.3 Mode content
After entering this mode, Syscon shall clear the information stored for service and output the result to the display tube.
CD will be ejected upon process ended.
Preset Frequencies and Tagging (HD models) information shall be cleared.
The following table shows the data that is cleared.
Display content
Detail
When normal end
When error end
Display blinks with 250ms interval.
D
A
T
A
C
L
R
O
K
D
A
T
A
C
L
R
N
G
Information for data clearing
Detail
Storage area
CD mecha information
CD mecha log display
E2PROM
CD load error information display
E2PROM
CD eject error information display
E2PROM
CD time code error count information display (count skip)
E2PROM
CD time code error count information display (no count update)
E2PROM
Service information
CD EJECT number of times display
E2PROM
Force Power OFF information display
E2PROM
DC error information
DC error 1 display (wrong connection & other detection information in detecting duration) E2PROM
DC error 2 display (capacitor leakage detection number information)
E2PROM
Preset information
Tuner Area Setting
E2PROM
Preset Frequency
E2PROM
Preset PI code
E2PROM
Preset HD Station Name and Sub-Channel Number (HD models)
E2PROM
Sirius XM information
(Sirius models)
SXM Preset Channel SID
E2PROM
SXM Lock SID
E2PROM
SXM Last Channel ID
E2PROM
SXM Channel Lock Code
E2PROM
Tagging information (HD models) Token data memory index
E2PROM
