JVC KD PDR50 - Radio / CD Instructions Manual Download Page 33

Page: 33 / 198

ENGLISH

Remote controller —

RM-RK50

Installing the lithium coin battery

(CR2025)

Aim the remote controller directly at the remote
sensor on the unit. Make sure there is no obstacle
in between.

Warning:

• Do not install any battery other than CR2025 or

its equivalent; otherwise, it may explode.

• Do not leave the remote controller in a place

(such as dashboards) exposed to direct sunlight
for a long time; otherwise, it may explode.

• Store the battery in a place where children

cannot reach to avoid risk of accident.

• To prevent the battery from over-heating,

cracking, or starting a fire:

– Do not recharge, short, disassemble, heat the

battery, or dispose of it in a fire.

– Do not leave the battery with other metallic

materials.

– Do not poke the battery with tweezers or similar

tools.

– Wrap the battery with tape and insulate when

throwing away or saving it.

This unit is equipped with the steering wheel
remote control function.
• See the Installation/Connection Manual (separate

volume) for connection.

Main elements and features

(standby/on/attenuator) button

• Turns the power on if pressed briefly or

attenuates the sound when the power is on.

• Turns the power off if pressed and held.

U (up) / D (down)

∞

buttons

• Changes the FM/AM bands with

• Changes the preset stations with D

∞

• Changes the folder of the MP3/WMA discs.
• While listening to an Apple iPod:

– Pauses or resumes playback with D

∞

– Enters the main menu with

(Now

U/D

∞

R/F

work as the menu

selecting buttons.)

VOL – / VOL + buttons

• Adjusts the volume level.

SOUND button

• Selects the sound mode (iEQ: intelligent equalizer).

SOURCE button

• Selects the source.

R (reverse) / F (forward)

buttons

• Searches for stations if pressed briefly.
• Fast-forwards or reverses the track if pressed and

held.

• Changes the tracks if pressed briefly.
• While listening to an iPod (in menu selecting

mode):

– Selects an item if pressed briefly. (Then, press

∞

to confirm the selection.)

– Skips 10 items at a time if pressed and held.

U :

Returns to the previous menu.

∞

Confirms the selection.

EN02-07_KD-PDR51_003A_1.indd 5

10/27/06 12:34:16 PM

All manuals and user guides at all-guides.com

Summary of Contents for KD PDR50 - Radio / CD







































































































































































































Search results

Summary of Contents for KD PDR50 - Radio / CD

Reviews:

Related manuals for KD PDR50 - Radio / CD

Brands by name

Popular brands

JVC KD PDR50 - Radio / CD, Instructions Manual

Search results

Summary of Contents for KD PDR50 - Radio / CD

Reviews:

Related manuals for KD PDR50 - Radio / CD

Brands by name

Popular brands