6
ENGLISH
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual searching to tune into a particular station.
Searching a station automatically: Auto search
1-
1
1-
3
1-
2
2
1
2
3
1
Select the band.
1
Press FUNC (Function) to select “FM” or
“AM.”
2
Press MODE.
“MODE” appears on the lower part of the
display.
3
Press BAND to select the band.
Each time you press the button, the band
changes as shown to the left:
2
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in FM stations only with strong signals
This function works only while searching FM stations, including SSM preset (see page 8).
1 Press MODE.
“MODE” appears on the lower part of the display.
2 Press INT/LO (Intro/Local), while “MODE” is still on the display, so that the LOCAL indicator
lights up on the display.
Each time you press the button, the LOCAL indicator lights up and goes off alternately.
INT/LO
MODE
Selected band (then clock
time: see page 33) appears.
Level meter (see page 33)
Note:
This receiver has three FM bands
(FM1, FM2, FM3). You can use any
one of them to listen to an FM
broadcast.
FM1
FM2
AM
FM3
To search stations of
higher frequencies
To search stations of
lower frequencies
EN06-10.KD-LX3R[E]/f
99.3.9, 6:14 PM
6
