JVC KD-LX10R Service Manual Download Page 19

Page: 19 / 74

SEL

MODE

DISP

RDS

PTY

OFF/

Press the three buttons (UP button )+( (Func button ). Then it is possible to select the follwing

service modes. After changing over to the service mode, press the UP button and DOWN button to

change the mode. For executing the respective service modes, press the SEL button.

With the service mode 2 , it is possible to call the error codes of the mechanism.

NORMAL MODE

DELEEPROM

CD-CH ERR

DEL CH-ERR

RUNNING

DELDATA

CD-ERR

(UP button ) + ( button) + ( button) at the same time.

: Deletion of entire EEPROM data. This mode is used when

shipping this system from factry.

: This mode is used only when the CD changer is connected.

: Running mode (Do not use this mode under the servise mode)

: (Deletion of CD error code and RDS data)

: Calling of CD mechanism error code

With the three error modes stored in maximum in the internal memory of the mechanism in the body of this

system, it is posible under the service mode to call the contents of error according to the following steps when

any error has occurred.

Data stored in EEPROM

1. RDS data

2. CD mechanism error cord

3. Station name (to be input by user)

4. DISC name (to be input by user)

5. AUX input name

*Any data 3 to 5 above should not be deleted.

Functions of the mechanism under the service mode

SOURCE

All manuals and user guides at all-guides.com

Summary of Contents for KD-LX10R











































































Search results

Summary of Contents for KD-LX10R

Reviews:

Related manuals for KD-LX10R

Brands by name

Popular brands

JVC KD-LX10R, Service Manual

Search results

Summary of Contents for KD-LX10R

Reviews:

Related manuals for KD-LX10R

Brands by name

Popular brands