32
ENGLISH
To cancel Advanced SCM
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes
and the playback sources
When shipped from the factory, a different sound mode can be stored in memory for each
source so that you can change the sound modes simply by changing the sources.
• LINK ON:
Advanced SCM (different sound modes for different sources)
• LINK OFF:
Conventional SCM (one sound mode for all sources)
To set the clock display
You can set the clock to be shown on the lower part of the display when the unit is turned on.
When shipped from the factory, the clock is set to be shown on the display.
• CLOCK ON:
Clock diplay is turned on.
• CLOCK OFF: Clock display is turned off. When “CLOCK OFF” is selected, the current
sound mode setting (see page 27) is shown on the upper part of the
display
To check the other information during play
Press DISP (Display) so that the other information will be shown on the the display for a while.
To select the level meter
You can select the level meter display according to your preference. When shipped from the
factory, “NORMAL” is selected.
• NORMAL:
Normal audio level meter (illuminates from bottom to top)
• REVERSE:
Level meter illuminates from top to bottom.
• WIDE:
Level meter illuminates from center to outside.
• RACE:
Level meter illuminates as if cars are racing.
• LEVEL OFF: Level meter stays lit and does not change its illumination.
• ALL OFF:
Level meter turns off.
To select the dimmer mode
When you turn on the car head lights, the display automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer mode is activated.
• AUTO:
Activates Auto Dimmer.
• OFF:
Cancels Auto Dimmer.
• ON:
Always dims the display.
Note on Auto Dimmer:
Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF.”
To select the telephone muting
This mode is used when a cellular phone system is connected. Depending on the phone
system used, select either “MUTING 1” or “MUTING 2,” whichever mutes the sounds from this
unit. When shipped from the factory, this mode is deactivated.
• MUTING 1
: Select this if this setting can mute the sounds.
• MUTING 2
: Select this if this setting can mute the sounds.
• MUTING OFF: Cancels the telephone muting.
EN29-38.LX10R[E]/F
00.1.12, 6:37 PM
32
