1-6 (No.49839)
2.1.3 Removing the front chassis assembly
(See Figs.3 and 4)
• Prior to performing the following procedures, remove the front
panel assembly and bottom cover.
(1) Remove the two screws
A
on the both sides of the main
body. (See Fig.3.)
(2) Remove the two screws
B
on the front side of the main
body. (See Fig.4.)
(3) Release the two joints
d
and two joints
e
on the both sides
of the main body. (See Fig.3.)
Fig.3
Fig.4
2.1.4 Removing the heat sink
(See Fig.5)
• Prior to performing the following procedure, remove the front
panel assembly as required.
(1) Remove the two screws
C
and two screws
D
on the left
side of the main body.
Fig.5
2.1.5 Removing the rear bracket
(See Fig.6)
• Prior to performing the following procedures, remove the bot-
tom cover.
(1) Remove the three screws
E
, three screws
F
and three
screws
G
on the back side of the main body.
(2) Remove the rear bracket.
Reference:
During reassembly, before fixing the rear bracket onto the
main body, insert the SUB WOOFER cable and LINE IN cable
into the slots.
Fig.6
Joint
d
Joint
d
Front chassis assembly
A
Joint
e
Joint
e
A
B
Front chassis assembly
C
D
Heat sink
F
G
E
E
Rear bracket
G
F
Insert SUB WOOFER cable and
LINE IN cable into the slots.
Summary of Contents for KD-LH3105
Page 78: ...KD LH3105 M E M O ...
